Extreme Networks Summit X150 Series Hardware Installation Manual page 179

Figure 134: Installing a 750 W AC PSU
NOTE
If PSUs are not installed in both power supply bays, be sure to install a cover over the unoccupied bay.
Unoccupied bays must always be covered to maintain proper system ventilation and EMI levels.
4 Connect the AC power cord as follows:
a If necessary, slide the plastic cord retainer farther away from the back of the switch
Figure 135: Moving the Power Cord Retainer
b Connect the AC power cord to the input connector
Summit Family Switches Hardware Installation Guide
SH_205
SH_227
(Figure 136).
(Figure 135).
179