Replacing A Summit X650 Fan Module - Extreme Networks Summit X150 Series Hardware Installation Manual

Maintenance Procedures for Summit X650 Series Switches

Replacing a Summit X650 Fan Module

You need a 1/2-inch flat-blade screwdriver to replace a Summit X480/X650 series fan module:
CAUTION
Be sure to finish the replacement procedure promptly. The switch may overheat if it is left without cooling
for an extended period.
To replace the fan module:
1 Completely loosen the captive retaining screws at the lower corners of the fan module
2 Slide the fan module out of the switch and set it aside.
Figure 253: Removing a Summit X650 Fan Module
3 Carefully slide the replacement fan module into the switch
Figure 254: Installing a Summit X650 Fan Module
4 Align and fully tighten the captive retaining screws.
296
SH_090
(Figure 254).
SH_091
Summit Family Switches Hardware Installation Guide
(Figure 253).