Extreme Networks Summit X150 Series Hardware Installation Manual page 180

Installing Summit Family Switches
Figure 136: Connecting the Power Cord
c Open the clip and slip it over the barrel of the connector
Figure 137: Attaching the Power Cord Retainer
d Snap the clip firmly around the connector.
5 Connect the other end of the power cord to an AC power outlet.
WARNING!
Always be sure that the source outlet is properly grounded before plugging the AC power cord into the
AC PSU.
To install a second PSU, repeat steps 1 through 5.
180
SH_228
(Figure
SH_229
Summit Family Switches Hardware Installation Guide
137).