Vim1-Summitstack256 Versatile Interface Module; Vim2 Versatile Interface Modules; Vim2-Summitstack Versatile Interface Module - Extreme Networks Summit X150 Series Hardware Installation Manual

VIM1-SummitStack256 Versatile Interface Module

The VIM1-SummitStack256 versatile interface module
stacking ports. To connect these ports, you must use stacking cables with compatible connectors,
available from Extreme Networks.
The VIM1-SummitStack256 module requires ExtremeXOS 12.4.1 software (or later) installed on the
Summit X650 series switch.
Figure 82: VIM1-SummitStack256 Versatile Interface Module
Stacking
port

VIM2 Versatile Interface Modules

A VIM2 versatile interface module can be installed in a dedicated slot at the back of the Summit X480
series switch to provide high speed stacking ports or 10-Gbps Ethernet ports.

VIM2-SummitStack Versatile Interface Module

The VIM2-SummitStack module
you to combine multiple units into a single SummitStack management entity.
For more information about configuring and operating a SummitStack configuration, refer to the
ExtremeXOS Concepts Guide and the ExtremeXOS Command Reference Guide.
Figure 83: VIM2-SummitStack Versatile Interface Module
LED
Summit Family Switches Hardware Installation Guide
LEDs
(Figure 83) provides two high-performance stacking ports that allow
Stacking port
SH_151
(Figure 82) provides two 128-Gbps SummitStack
Stacking
port
SH_168
113