Extreme Networks Summit X150 Series Hardware Installation Manual page 238

Installing Summit External Power Supplies
Figure 199: Securing the EPS-600LS to the EPS-C Chassis
Tighten Screws
EPS-600LS
O.T.P
DC OK
! See Manual
AC OK
5 Connect an appropriate AC power cord to the AC connector on the EPS-600LS unit (see
Use the cable clip on the EPS-600LS unit to hold the AC power cord in place (see
NOTE
An AC power cord is not provided with the EPS-600LS unit. See
page 311 for information about selecting a power cord.
CAUTION
The EPS-600LS unit does not have a switch for turning the unit on and off. Disconnect power to the
EPS-600LS unit by removing the plug from the electrical outlet. Make sure that this connection is easily
accessible to you.
238
EPS-C_05A
"Selecting Power Supply Cords" on
Summit Family Switches Hardware Installation Guide
Figure 200).
Figure 200).