Installing A Summit Xgm3-2Sf Port Option Card - Extreme Networks Summit X150 Series Hardware Installation Manual

Installing Optional Ports

Installing a Summit XGM3-2sf Port Option Card

The XGM3-2sf port option card can be installed only in a Summit X460 series switch; it is not
mechanically compatible with any other Summit switch series.
To install the XGM3-2sf port option card:
1 Attach an ESD-preventive wrist strap to your bare wrist and connect the metal end to an appropriate
ground point on the rack.
2 At the back of the switch, remove the blank cover over slot A (Figure 203).
Figure 203: Removing the Slot A Cover
SH_213
3 Carefully slide the XGM3-2sf port option card all the way into the slot (Figure 204).
4 Align and fully tighten the captive retaining screws.
Figure 204: Installing an XGM3-2sf Port Option Card
SH_214
Summit Family Switches Hardware Installation Guide
244