Extreme Networks Summit X150 Series Hardware Installation Manual page 340

Table 63: Summit X450a Series Switch Technical Specifications (Continued)
Input current
Inrush current
Input wire harness
Power supply cord gauge
Power cord input plug
Power supply input socket
Summit X450a-24x Power
Operational voltage range
Nominal input ratings
Nominal input current
Line frequency range
Inrush current
Power supply cord type
Power supply input socket
Power cord input plug
Power cord wall plug
Power supply cord gauge
Efficiency
Heat dissipation
Power consumption
Summit X450a-24xDC Power
Operational voltage range
Nominal input ratings
Input current
Inrush current
Input wire harness
Power supply input socket
Power cord input plug
Power cord wall plug
Power supply cord gauge
Heat dissipation
Power consumption
Safety Standards
North American Safety of ITE
340
4.0 A @ –36 V DC (low-line)
2.0 A @ –72 V DC (high-line)
29 A @ 48 V, 30 A @ 72 V
Extreme part number 250088
2
14 AWG (2.0 mm )
TYCO PN 206060-1
TYCO PN 206061-1
90 to 264 V
100 to 240 V , 50/60 Hz, 1.5 A
1.0 A @ 115 V (low-line)
0.5 A @ 230 V (high-line)
47 to 63 Hz
30 A @ 115 V, 60 A @ 230 V
AC
IEC 320 C14
IEC 320 C13
Refer to "Selecting Power Supply Cords" on page
2
18 AWG (0.75 mm ) up to 6 feet or 2 meters
or
2
16 AWG (1.0 mm ) over 6 feet
80% with 60% to 100% load
80 W (273 BTU/hr)
80 W (273 BTU/hr)
–36 to –72 V
–48 V , 2.5 A
2.5 A @ -36 V (low-line)
1.25 A @ -72 V (high-line)
40 A peak maximum
Extreme Networks PN 250088
TYCO PN 206061-1
TYCO PN 206060-1
None provided
2
14 AWG (2.0 mm )
98 W (334 BTU/hr)
98 W (334 BTU/hr)
UL 60950-1:2003 1st Ed., Listed Device (US)
CSA 22.2#60950-1-03 1st Ed.(Canada)
Complies with FCC 21CFR 1040.10 (US Laser Safety)
CDRH Letter of Approval (US FDA Approval)
IEEE 802.3af 6-2003 Environment A for PoE Applications
Summit Family Switches Hardware Installation Guide
311.