Extreme Networks Summit X150 Series Hardware Installation Manual page 379

Table 79: EPS-600LS External Power Module (Model 10913)
For use with the Summit X450e-48p and X250e-48p switches
Must be installed in the EPS-C chassis (Model 10912)
Operational voltage range
Nominal input ratings
Nominal input current
Line frequency range
Maximum inrush current
Output power
Power supply cord type
Power supply input socket
Power cord input plug
Power cord wall plug
Power supply cord gauge
Efficiency
Heat dissipation, Watts, BTU/hr
Power consumption, Watts, BTU/hr
Ambient operating temperature
Output Ratings for EPS-C chassis with 1, 2, or 3 installed EPS-600LS units
One EPS-600-LS unit
Two EPS-600-LS units
Three EPS-600-LS units
Summit Family Switches Hardware Installation Guide
90 to 264 V
100-250 V , 50-60 Hz, 10 A
7 A @ 115 V (low-line)
3.5 A @ 230 V (high-line)
47 to 63 Hz
17 A @ 115 V/60 Hz, maximum load
600 W
AC
IEC 320 C14
IEC 320 C13
Refer to "Selecting Power Supply Cords" on page
2
18 AWG (0.75 mm ) up to 6 feet or 2 meters
or
2
16 AWG (1.0 mm ) over 6 feet
85% nominal
219 W, 747.3 BTU/hr
801 W, 2733.1 BTU/hr
0° C to 40° C (32° F to 104° F)
582 W output: –48 V/9 A (432 W), 12 V/12.5 A
1116 W output: –48 V/18 A (864 W), 12 V/21 A
1260 W output: –48 V/21 A (1008 W), 12 V/21 A
311.
379