Summit X460-48X Switch - Extreme Networks Summit X150 Series Hardware Installation Manual

Summit X460-48x Switch

The front panel of the Summit X460-48x switch
Forty-eight unpopulated SFP ports (ports 1–48) that provide 48 Gbps of fiber connectivity. The SFP
●
ports support both 100BASE-FX and 1000BASE-X optical modules.
All the front-panel ports on the Summit X460-48x switch support Synchronous Ethernet. For
information about this feature, see the ExtremeXOS Concepts Guide.
For information about SFPs, see the Extreme Networks Pluggable Interface Modules Installation Guide.
10/100/1000 Mbps management port
●
Serial console port used to connect a terminal and perform local management
●
LEDs to indicate port status and switch operating conditions
●
For a description of the LEDs and their operation, see
page 77.
Stack number indicator
●
Figure 57: Summit X460-48x Switch Front Panel
Management port
Stack number
indicator
The rear panel of the Summit X460-48x switch
Slot for an XGM3-2sf port option card (see
●
Slot for a SummitStack or SummitStack-V80 stacking module (see
●
Replaceable fan tray
●
Two power supply bays for either AC or DC power supplies (see
●
page 99
Figure 58: Summit X460-48x Switch Rear Panel
Module slot A Module slot B
Filler panel Filler panel
Summit Family Switches Hardware Installation Guide
(Figure 57) includes:
"Summit X460 Series Switch LEDs" on
SFP ports
(Figure 58) includes:
page 115
Two power supply
Fan tray (PSU) slots
Filler panel
Console
port
SH_187
page 115)
"Summit X460 Power Supplies" on
SH_188
73