Rack-Mounting A Summit Switch (Models Other Than Summit X460, X480, And X650 Series) - Extreme Networks Summit X150 Series Hardware Installation Manual

Summit x150 series summit x250e series summit x350 series summit x450 series summit x450a series summit x450e series summit x460 series summit x480 series summit x650 series
Hide thumbs Also See for Summit X150 Series:
Table of Contents

Advertisement

A Summit family switch can be mounted in a standard 19-inch (48.26 cm) rack or placed free-standing
on a tabletop. The installation process includes the following tasks:
1 Install the switch in a rack or on a table.
2 (Optional) Install port option cards.
3 Ground the switch (DC-powered units only).
4 Connect a redundant power supply (if applicable).
5 Connect power cables.
6 Connect network interface cables.
If you are installing Summit family switches for use in a SummitStack configuration, read
Chapter 5
before you install the switches.
For information about installing port option cards, see
For information about grounding and connecting DC-powered Summit family switches, see
Summit DC-Powered Switches" on page
For information about installing and connecting redundant power supplies, see
Rack-Mounting a Summit Switch (Models Other than
Summit X460, X480, and X650 Series)
This section describes how to install Summit switch models other than the Summit X460, X480, and
X650 series switches.
The following items are provide with the Summit switch:
Mounting brackets
Screws to secure the mounting brackets to the switch
-
Eight M3 screws for Summit X350, X450, X450a, and X450e series switches
-
Twelve M4 screws for Summit X150 and X250e series switches
To install the switch in a rack, you need the following additional tools and equipment:
Four rack mounting screws
The screw size will vary based on your organization's rack system; screws are not provided.
Screwdriver for securing the switch to your organization's rack
The screwdriver size will vary based on the requirements of your organization's rack system.
AC power cord
An AC power cord is not included with the Summit family switch. You must obtain a power supply
cord that meets the requirements listed under
Summit Family Switches Hardware Installation Guide
Chapter
8.
167.
"Selecting Power Supply Cords" on page
"Installing
Chapter
7.
311.
165

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents