Port Bandwidth - D-Link DES-3350SR User Manual

To enable or disable GVRP, globally, on the switch:
Go to the Configuration menu and click Advanced Settings. Toggle the drop-down menu for GVRP Status between Enabled and
Disabled. Click Apply to let your change take effect.

Port Bandwidth

The Bandwidth Settings window allows you to set and display the Ingress bandwidth and Egress bandwidth of specified ports on
the switch.
D-Link DES-3350SR Standalone Layer 3 Switch
GVRP <Disabled>
Ingress <Disabled>
Acceptable Frame
Types
The Group VLAN Registration Protocol
(GVRP) enables the port to dynamically
become a member of a VLAN.
This field can be toggled using the space
bar between Enabled and Disabled.
Enabled enables the port to compare the
VID tag of an incoming packet with the
PVID number assigned to the port. If the
two are different, the port filters (drops)
the packet. Disabled disables Ingress
filtering.
This field denotes the type of frame that
will be accepted by the port. The user
may choose between Tagged Only,
which means only VLAN tagged frames
will be accepted, and Admit_All, which
means both tagged and untagged frames
will be accepted. Admit_All is enabled by
default.
41