Port Bandwidth - D-Link DES-3250TG User Manual

DES-3250TG Layer 2 Fast Ethernet Switch User's Guide
GVRP <Disabled>
Ingress <Disabled>
To enable or disable GVRP, globally, on the switch:
Go to the Configuration menu and click Advanced Settings.
Toggle the drop-down menu for GVRP Status between Enabled
and Disabled. Click Apply to let your change take effect.

Port Bandwidth

The Bandwidth Settings window allows you to set and display
the Ingress bandwidth and Egress bandwidth of specified ports
on the switch.
PVID of 3, then all untagged packets
received on port #2 will be assigned
to VLAN 3. This number is generally
the same as the VID# number
assigned to the port in the Modify
802.1Q VLANs menu above.
The Group VLAN
Protocol (GVRP) enables the port to
dynamically become a member of a
VLAN.
This field can be toggled using the
space bar between Enabled
Disabled. Enabled enables the port to
compare the VID tag of an incoming
packet with the
assigned to the port. If the two are
different, the port filters (drops) the
packet. Disabled disables Ingress
filtering.
112
Registration
and
PVID number