Setting Ip Addressing Using Telnet - HP StorageWorks 6100 - Enterprise Virtual Array User Manual

4. Telnet to the mpx110 using IP address 1.0.0.1, or use a terminal emulation program (serial
cable) from your workstation (see
a. Enter guest at the login prompt.
b. Enter password at the password prompt.
NOTE:
HP recommends changing the mpx110 guest password after logging in.
Figure 19 Setting IP addressing using Telnet
.
5. Enter admin start at the mpx110 prompt.
6. Enter the default password, config.
NOTE:
HP recommends that you change the mpx110 Admin password after logging in.
7. Enter the command set mgmt to set initial parameters.
Figure 19):
IP Distance Gateway User Guide 45