Fibre Channel Driver; Fc Driver Fatal Log Messages - HP StorageWorks 6100 - Enterprise Virtual Array User Manual

ID Log message
#%d: QLProcessResponseQueue: Invalid handle for
70499
ET_PASSTHROUGH_STATUS
#%d: QLProcessResponseQueue: Invalid entry type in
70501
response queue %x
#%d: QLProcessResponseQueue: Invalid handle %x
70502
EntryType %x
70524 #%d: QLProcessAen: Invalid event %x
70544 #%d: QLRebootTimer: Reboot failed!
#%d: QLReadyTimer: Adapter missed heartbeat for
70563
0x%x seconds. Rebooting
#%d: QLReadyTimer: Abort pTpb=%p failed, DrvCount
70564
0x%x
70609 #%d: QLProcessSystemError: Restart RISC
70610 #%d: QLProcessSystemError: RebootHba failed
70784 #%d: QLConfigChip: invalid NVRAM
70835 #%d: QLStartFw: MBOX_CMD_SET_FLASH failed %x
70836 #%d: QLStartFw: Invalid Fw loader state 0x%x
70837 #%d: QLStartFw: Load Fw loader timeout

Fibre Channel driver

Table 32 lists fatal log messages common to both Fibre Channel ports, 1 (FC1) and 2 (FC2). Log
messages beginning with #0 apply to Fibre Channel port 1 (FC1), and log messages beginning with
#1 apply to Fibre Channel port 2 (FC2).
Table 32 FC driver Fatal log messages
ID
102419
102420
152 Log data
Log message
#%d: qlutm_init: Diagnostic failed, port 1 invalid SRAM
#%d: qlutm_init: Diagnostic failed, port 1 POST failed
No. Description
Response queue invalid
867
handle for ET pass-through.
Response queue invalid
869
entry type.
Response queue invalid
870 handle for specified entry
type.
Asynchronous event for un-
892
known event type.
912 Reboot timer failed.
iSCSI driver missed iSCSI
931 processor heartbeat. iSCSI
processor rebooted.
iSCSI processor failed to
932 complete operation before
timeout.
iSCSI processor system error
977
restart.
iSCSI processor reboot
978
failed.
iSCSI processor NVRAM in-
1152
valid (checksum error).
iSCSI FLASH (NVRAM)
1203
command failed
iSCSI firmware loader inval-
1204
id state
iSCSI failed to load firm-
1205
ware in time allotted
No. Description
FC1 processor SRAM
19
test failed.
FC1 processor POST
20
failed.