Fcip Routes; Fcip Route Info Tab Settings; Snmp Management Tab - HP StorageWorks 6100 - Enterprise Virtual Array User Manual

Figure 39 SNMP Management tab
.

FCIP routes

The FCIP routes tab
"FCIP Route Info tab
NOTE:
Selecting the FCIP Routes branch on the System tree does not provide any information in the right
window.

FCIP Route Info tab settings

• FCIP Interface Status Provides a dialog box for enabling and disabling the FCIP route. When the
route is disabled the FC and GE ports are placed in a down state, but all route configuration
parameters are retained. When you change this setting, you must click Save (at the bottom of the
tab) for the change to take effect.
• FC Port Identifies the FC port used for this FCIP route. The FC port cannot be changed because
it is selected when the route is created.
• FC Link Status Provides the state of the FC port used in this FCIP route.
• GigE Port Identifies the GigE port used for this FCIP route. The GigE port cannot be changed
because it is selected when the route is created.
• GigE Link Status Provides the state of the GigE port used in this FCIP route.
NOTE:
Change to the following settings do not take effect until you click Save at the bottom of the page.
(Figure 40) consists of two sections: FCIP Route Information and Statistics.
settings" on page 75 provides a definition for each setting.
IP Distance Gateway User Guide 75