Traceroute Command - HP StorageWorks 6100 - Enterprise Virtual Array User Manual

NOTE:
The target add command is not currently supported.
Authority
Syntax
Parameter
Example

Traceroute command

Tracks the route that packets take across an IP network on their way to an IP host.
Authority
Syntax
Example
130 Command-line interface
Admin session
target
rm
Removes a target from the mpx110 target database
The following is an example of the target rm command:
mpx110 (admin) #> target rm
Index (WWNN,WWPN/iSCSI Name)
---------------------------
0 20:00:00:20:37:fd:8b:ab:00:00:00:00:fc:b6:1f:fa
Please select an 'OFFLINE' Target from the list above
('q' to quit): q Command aborted.
Admin session
traceroute
The following is an example of the traceroute command:
mpx239 (admin) #> traceroute
nl
A list of attributes with formatting and current values will follow.
nl
Enter a new value or simply press the ENTER key
nl
to accept the current value. To terminate this process before
nl
reaching the end of the list, press q or Q
nl
and the ENTER key.
nl
nl
IP Address (IPv4 or IPv6)
Outbound Port (0=Mgmt, 1=GE1, 2=GE2, ...)
Tracing route to 44.44.1.240 over a maximum of 30 hops:
1 44.44.1.240 201.4ms 100.2ms 100.2ms
Traceroute completed in 1 hops.
nl
[0.0.0.0] 44.44.1.240
[Mgmt ] 1