Connection To Mpx Manager; Fcip Route Add Wizard - HP StorageWorks 6100 - Enterprise Virtual Array User Manual

Configuring the FCIP routes using the mpx Manager GUI
1. Invoke the mpx Manager previously installed on the computer
Figure 21 Connection to mpx Manager
.
2. Click the Connect icon in the top left corner of the screen.
3. Enter the mpx110 IP address, and then click the Connect button.
4. Select the Wizard menu to run the FCIP Route Add wizard
A warning message appears.
Figure 22 FCIP Route Add wizard
.
5. Click Yes to continue.
The FC & GigE Port Selection screen appears.
(Figure 21).
(Figure 22).
IP Distance Gateway User Guide 49