D Saving And Restoring The Mpx110 Configuration; Saving The Mpx110 Configuration; Saving The Configuration Using The Mpx110 Gui; Saving The Configuration Using The Mpx110 Cli - HP StorageWorks 6100 - Enterprise Virtual Array User Manual

D Saving and restoring the mpx110
configuration
This appendix describes how to save and restore mpx110 configuration information. The mpx110
configuration information is saved as a .bin or .tgz file, depending on the save method used to
restore the mpx110 persistent data. The mpx110 configuration information is saved and restored
using the mpx110 manager GUI or mpx110 CLI commands.
NOTE:
As with any important database, the mpx110 persistent data should be saved periodically to avoid
data loss from hardware or software errors. It is also important to save the configuration information
before replacing the mpx110.

Saving the mpx110 configuration

Using the mpx110 GUI to save configuration information allows you to save the file to any location
available to the server running the GUI.
Using the mpx110 CLI command to save the configuration information places the file in the mpx110's
FTP directory. You must then move the file using FTP from the mpx110.

Saving the configuration using the mpx110 GUI

To save the configuration using the mpx110 GUI:
1. Select File > Save FRU.
The Save FRU dialog box appears.
2. Click Save.
3. Enter a file name and select a location to save to.
NOTE:
Do not change the Files of Type value.
4. Enter the password config, and then click OK.
The configuration is saved to the selected location.

Saving the configuration using the mpx110 CLI

To save the configuration using the mpx110 CLI:
IP Distance Gateway User Guide 169