Diagnostics And Troubleshooting; Post Diagnostics; Heartbeat Led (Green); Locating Leds - HP StorageWorks 6100 - Enterprise Virtual Array User Manual
Hp storageworks ip distance gateway user guide (5697-0376, april 2010)
Hide thumbs
Also See for StorageWorks 6100 - Enterprise Virtual Array:
- User manual (462 pages) ,
- User manual (232 pages) ,
- User manual (362 pages)
Table of Contents
Advertisement
Diagnostics and troubleshooting
Diagnostic information about the mpx110 is available through the chassis LEDs and the port LEDs
(Figure
23). Diagnostic information is also available through the mpx Manager GUI, CLI event logs,
and error displays. This section describes the following:
• Power-On Self-Test (POST)
• Heartbeat
• Input Power
• System Fault
• Fibre Channel Port
Figure 23 Locating LEDs
.
POST diagnostics
The mpx110 completes a series of tests as part of its POST procedure:
•
Memory
•
FLASH validation
•
PCI device discovery
•
Management Ethernet port
Heartbeat LED (green)
The Heartbeat LED indicates the status of the internal mpx110 processor and any POST error results.
Following a normal power-up, the Heartbeat LED flashes about once per second to indicate that the
mpx110 passed the POST and that the internal mpx110 processor is running. See
description of all Heartbeat LED flash codes.
56
Installation and upgrades
diagnostics, page 56
LED, page 56
LED, page 57
LED, page 57
LEDs, page 57
Table 15
for a
Advertisement
Table of Contents
