Example
The following is an example of the set system command:
mpx110 (admin) #> set system
A list of attributes with formatting and current values
will follow. Enter a new value or simply press the
ENTER key to accept the current value.
If you wish to terminate this process before reaching
the end of the list press 'q' or 'Q' and the ENTER key
to do so. System Symbolic Name (Max = 64 characters) [ ] testing
Mode (0=Normal, 1=Transparent, 2=Encap_FC) [0 ]
System Log Level (Min = 0, Max = 3) [0 ]
All attribute values that have been changed will now be saved.
116
Command-line interface