Installation And Upgrades; Verifying Mpx110 Requirements - HP StorageWorks 6100 - Enterprise Virtual Array User Manual

3 Installation and upgrades

This chapter contains the information needed to install, configure, and upgrade the mpx110.

Verifying mpx110 requirements

Obtain the following (one of each, unless otherwise noted) for the local and remote site:
• HP StorageWorks IP Distance Gateway (mpx110), Part Number: AG680A
• HP Continuous Access EVA or XP software
EVA3000/5000, EVA4400/4400 with embedded switch, EVA4000/4100/6000/6100/8000/
8100, EVA6400/8400, or XP24000/20000/12000/10000 storage system
• FC fabrics consisting of HP B-series or C-series switches
• Cat 5e network cable, two per site
• Optical SFPs and FC cables, two per site
Additional optional equipment (one of each, unless otherwise noted) for the local and remote site:
• HP StorageWorks IP Distance Gateway Upgrade (mpx110 for redundancy), Part Number: AG681A
• Optical SFPs and FC cables, two per site
NOTE:
For the latest information about the minimum system requirements, see the HP StorageWorks IP
Distance Gateway release notes , available at http://www.hp.com/support/manuals. Under Storage,
select Storage Networking, and then under Routers/Gateways/Multiplexers, select
HP StorageWorks IP Distance Gateway.
IP Distance Gateway User Guide 39