Fciproute Command - HP StorageWorks 6100 - Enterprise Virtual Array User Manual

Parameter
Notes
Example

FcipRoute command

The fciproute command configures a new FCIP route and modifies or deletes an existing FCIP
route. Each FCIP route requires a dedicated FC and Gigabit Ethernet (GbE) port. Configuring an FCIP
route and specifying an FC and GE port pair take precedence over any previous configuration for
the port pair (FC/GE).
Authority
Syntax
Parameters
[MMDDhhmmCCYY]
Specifies the date This requires an Admin session. If you omit
[MMDDhhmmCCYY], the current date appears, which does not require
an Admin session.
NTP must be disabled to set the time with the date command.
See "Set command" on page 109 for information about NTP.
The following is an example of the date command:
mpx110 (admin) #> date 010314282006
Tue Jan 3 14:28:00 2006
mpx110 (admin) #> date
Tue Jan 3 14:28:14 2006
Admin session
fciproute
add
Configures a new FCIP route
mod
Modifies an existing FCIP route
rm
Removes an existing FCIP route
IP Distance Gateway User Guide 99