Fru Command - HP StorageWorks 6100 - Enterprise Virtual Array User Manual

FRU command

Saves and restores the mpx110 configuration.
Authority
Syntax
Parameters
Examples
102 Command-line interface
Admin session
fru
restore
fru restore requires that the user first ftp the .tar file containing
the desired configuration to the mpx110. When this command is issued
it prompts the user for the restore level. The user has the option of fully
restoring the mpx110's configuration (all configuration parameters and
LUN mappings) or restoring only the LUN mappings. The restored
configuration do not take effect until the mpx110 is rebooted.
save
fru save creates a .tar file containing the mpx110's persistent
data, configuration and LUN mappings, storing the file in the mpx110's
/var/ftp directory. The user must then FTP the .bin file from the
mpx110.
The following is an example of the fru restore command:
mpx110 (admin) #> fru restore
A list of attributes with formatting and current values will
follow. Enter a new value or simply press the ENTER key to
accept the current value. If you wish to terminate this
process before reaching the end of the list press 'q' or 'Q'
and the ENTER key to do so.
Type of restore (0=full, 1=mappings only) [full]
nl
FRU restore completed. Please reboot the system for configuration
nl
to take effect.
The following is an example of the fru save command:
mpx110 (admin) #> fru saveFRU save completed. Con-
figuration File is HP_StorageWorks_mpx110_fru.bin.
Please use FTP to extract the file out from the
System.