Ping Command; Quit Command - HP StorageWorks 6100 - Enterprise Virtual Array User Manual

Authority
Syntax
Example

Ping command

Verifies the connectivity of each Ethernet port: management, GE1 (iSCSI 1), and GE2 (iSCSI 2).
Authority
Syntax
Example

Quit command

Exits the CLI and returns the operator to the login prompt.
Admin session required only to set the command
password
The following is an example of the password command:
mpx110 (admin)
#> passwd
Press 'q' and the ENTER key to abort this command.
Select password to change (0=guest, 1=admin): 1
account OLD password
account NEW password (6-128 chars) :
please confirm account NEW password
Password has been changed.
Admin session
ping
mpx239 (admin) #> ping
A list of attributes with formatting and current values
will follow.
Enter a new value or simply press the ENTER key to
accept the current value. If you wish to terminate this
process before reaching the end of the list press 'q' or
'Q' and the ENTER key to do so.
IP Address (IPv4 or IPv6) [0.0.0.0] 44.44.1.240
Iteration Count (0=Continuously) [0 ] 10
Outbound Port (0=Mgmt, 1=GE1, 2=GE2, ...) [Mgmt ] 1
Size Of Packet (Min=1, Max=62256 Bytes) [56 ] 62256
Pinging 44.44.1.240 with 62256 bytes of data:
Reply from 44.44.1.240: bytes=62264 time=109.0ms
Reply from 44.44.1.240: bytes=62264 time=108.5ms
Reply from 44.44.1.240: bytes=62264 time=108.5ms
Reply from 44.44.1.240: bytes=62264 time=108.5ms
Reply from 44.44.1.240: bytes=62264 time=108.5ms
Reply from 44.44.1.240: bytes=62264 time=108.6ms
Reply from 44.44.1.240: bytes=62264 time=108.5ms
Reply from 44.44.1.240: bytes=62264 time=108.4ms
Reply from 44.44.1.240: bytes=62264 time=108.5ms
Ping Statistics for 44.44.1.240:
Packets: Sent = 10, Received = 9, Lost = 1
Minimum = 108.4ms, Maximum = 109.0ms, Average = 108.5ms
mpx239 (admin) #>
IP Distance Gateway User Guide
: ******
******
: ******
107