HP StorageWorks 6100 - Enterprise Virtual Array User Manual page 148

ID Log message
#%d: QLTimer: Link error count (0x%x) exceeded, link
106853
down
106912 #%d: QLReserveLoopId: out of loop Ids
#%d: QLMarkDeviceOffline: Device Id: %x marked off-
106928
line, cLinkDownTimeout = %x, cPortDownRetryCount=%x
106948 #%d: QLSnsGetAllNext: Name server login FAILED %x
107029 #%d: QLUpdateDeviceData: out of slots in host database
#%d: QLUpdateDeviceDatabase 0x%x: GET_ID failed
107041
%x
#%d: QLUpdateDeviceDatabase 0x%x: out of slots in
107056
host database
#%d: QLUpdateDeviceDatabase 0x%x:
107058
MBOX_CMD_GET_VP_DATABASE failed %x
107078 #%d: QLUpdatePort 0x%x: out of slots in host database
107254 #%d: QLUpdatePort 0x%x: out of slots in host database
#%d: QLFcipIsrEventHandler: System error event (%x),
107267 MB1=%x, MB2=%x, MB3=%x, MB4=%x, MB5=%x,
MB6=%x, MB7=%x
#%d: QLExecuteMSIOCB: Execute Management Server
107746
IOCB fatal error
148 Log data
No. Description
The driver has determined
that the FC link is unreliable
and unusable due to the
357
number of errors en-
countered. The link has been
taken down.
The FC processor was unable
to obtain the number of loop
IDs required. This failure oc-
416
curs only when the FC pro-
cessor is running multi-ID
firmware.
The driver was unable to re-
establish connection to the
432 target within the timeout and
retry counts, and is therefore
marking it offline.
The FC processor is unable
452 to log into the FC fabric
name server.
The driver's host (initiator)
533
database is full.
The driver's target database
545
is full.
The driver's host (initiator)
560 database is full. Maximum
host database is 64.
FC processor "Get VP Data-
562
base entry command" failed
The drivers host (initiator)
582
database is full.
No slots available in host
758
database
771 FCIP system error event
iSCSI firmware failed to re-
spond to a request of send-
1250
ing a SNS command to the
name server