HP StorageWorks 6100 - Enterprise Virtual Array User Manual page 140

ID Log message
41058 QLBA_CreateTargetDeviceObject: Too many devices
41060 QLBA_CreateTargetNodeObject: Too many devices
41067 QLBA_CreateLunObject: LunObject memory unavailable
41077 QLBA_CreateInitiatorObject: Too many initiators
QLBA_DisplayTargetOperationStatus: PCI Error, Status
41096
0x%.2x
QLBA_DisplayInitiatorOperationStatus: DMA Error,
41106
Status 0x%.2x
QLBA_DisplayInitiatorOperationStatus: Transport Error,
41107
Status 0x%.2x
QLBA_DisplayInitiatorOperationStatus: Data Overrun,
41111
Status 0x%.2x
QLIS_LoginPduContinue: Operation failed. Initiator
41234
0x%x, TPB status 0x%x
QLKV_ValidateLoginTransitCsgNsgVersion failed (status
41238
0x%x)
41257 QLIS_LoginPduContinue: Invalid initiator name. Initiator:
41265 QLIS_LoginPduContinue: Target not configured for Portal
41267 QLIS_LoginPduContinue: Target not found. Target name:
140 Log data
No. Description
Unable to create an object for
the target device; exceeded
98
the maximum number of target
devices
Unable to create an object for
the target node; exceeded the
100
maximum number of target
devices
Memory unavailable for LUN
107
object
Unable to create an object for
117 initiator object; exceeded the
maximum number of initiators
Process control block status
indicates that a PCI error oc-
136
curred during a target opera-
tion
Process control block status
indicates that a DMA error
146
occurred during an initiator
operation
Process control block status
indicates that a transport error
147
(protocol) occurred during an
initiator operation
Process control block status
indicates that a data overrun
151
error occurred during an initi-
ator operation
iSCSI Login failed between
274 receipt of PDU and request for
the data segment.
iSCSI Login failed due to un-
278 supported version number in
received login PDU.
iSCSI Login PDU contains inval-
id initiator name. The format
297
and character set used to form
the initiator name is invalid.
iSCSI target Login was attemp-
ted to a portal (iSCSI1 or iSC-
305
SI2) on which the target is not
presented.
iSCSI Login PDU received for
307 a target with a target name
unknown to the router.