History Command - HP StorageWorks 6100 - Enterprise Virtual Array User Manual

History command

Displays a numbered list of the previously entered commands.
Authority
Syntax
Notes
Example
show chap
show fc [ <PORT_NUM> ]
show fciproutes [ <LINK_ID> ]
show features
show initiators [ fc | iscsi ]
show logs
show memory
show mgmt
show ntp
show perf [ byte | init_rbyte | init_wbyte | tgt_rbyte |
tgt_wbyte ] show statsshow system
show properties
show snmp
show stats
show system
show targets [ fc | iscsi ]
show vlan [ <PORT_NUM> ]
shutdown
target [ add | rm ]
Admin session
history
Closing a Telnet window during an Admin session does not release the
session. In this case, you must either wait for the Admin session to time
out or use admin cancel command.
The following is an example of the history command:
mpx110 (admin) #> history
mpx110 (admin) #> history
1: admin start
2: help
3: history
mpx110 (admin) #>
IP Distance Gateway User Guide 105