HP StorageWorks 6100 - Enterprise Virtual Array User Manual page 141

ID Log message
iSCSI Login PDU received without a target name for a
41268
normal session.
iSCSI Login PDU received without an initiator name
41270
key/value not provided.
QLIS_LoginPduContinue: CONN_STATE_IN_LOGIN,
41272
Unknown InitTaskTag
41283 QLIS_LoginPduContinue: TSIH 0x%x out of range
QLIS_LoginPduContinue: Session does not exist, invalid
41284
TSIH 0x%x
41353 QLIS_LoginPduContinue CHAP Validation Failure
41354 QLIS_LoginPduContinue Unexpected CHAP key detected
QLBI_SetPortInfo: QLUT_AllocatePortalObject failed
41508
(PortType 0x%x, PortId 0x%x)
41626 QLBI_GetLunInfo: INQUIRY failed, TPB status 0x%x
QLBI_GetLunInfo: QLBI_PassthruCommand failed for
41629
INQUIRY (page code 0x83)
QLBI_GetLunInfo: QLBI_PassthruCommand failed for
41635
READ CAPACITY
No. Description
iSCSI Login PDU received
308 without a target name for a
normal session.
iSCSI Login PDU received
310 without an initiator name key
or value.
iSCSI Login PDU received with
an incorrect initiator task tag
for a session which is partially
logged in. This would occur if
a login PDU other than the
312
initial login PDU used an initi-
ator task tag that was different
than the initiator task tag
provided in the initial login
PDU.
iSCSI Login PDU was received
with a TSIH out of range. This
would occur if the iSCSI initiat-
or attempting the login failed
323
to used the TSIH value
provided in the Target Login
Response PDU (router is target)
in subsequent login PDUs.
iSCSI Login PDU was received
with an invalid TSIH value.
324 The TSIH is invalid because
there is no session with that
TSIH value.
CHAP validation failed during
393
login
394 Unexpected CHAP key
Failure to allocate object for
"Set Port Info" IOCTL pro-
cessing. PortType: 0 = FC, 1
548
= iSCSI. PortId: 0 = FC1 or
iSCSI1(GE1), 1 = FC2 or
iSCSI2 (GE2).
The Inquiry command issued
666 by the mpx110 as part of its
discovery process failed.
The Inquiry command issued
669 by the mpx110 as part of its
discovery process failed.
The Inquiry command issued
675 by the mpx110 as part of its
discovery process failed.
IP Distance Gateway User Guide 141