Save Command; Set Command - HP StorageWorks 6100 - Enterprise Virtual Array User Manual

Save command

Saves logs and traces.
Authority
Syntax
Parameters
Examples

Set command

Configures general parameters, as well as parameters for the FC, iSCSI, and management ports.
Authority
Syntax
Admin session
save
capture
Creates a debug file that captures all debug dump data. After the
command completes, you must FTP the debug capture file from the
mpx110.
logs
Creates a .tar file containing the mpx110's log data, storing the file
in the mpx110's /var/ftp directory. The operator must then FTP the
logs .tar file from the mpx110.
traces
Creates a .tar file containing the mpx110's dump data storing the
.tar file in the mpx110's /var/ftp directory. The operator must then
FTP the trace's .tar file from the mpx110. If the mpx110 does not
have any dump data, the operator will be notified when executing this
command. An event log entry is generated whenever a data dump is
generated.
The following is an example of the save capture command:
mpx110 (admin) #> save capture
Debug capture completed. Package is System_Capture.
tar.gz Please use FTP to extract the file out from
the System.
The following is an example of the save logs command:
mpx110 (admin) #> save logs
Save Event Logs completed. Package is System_Evl.tar.gz
Please use FTP to extract the file out from the System.
The following is an example of the save traces command:
mpx110 (admin) #> save tracesSave ASIC Traces com-
pleted. Package is System_Asic_Trace.tar.gz. Please
use FTP to extract the file out from the Sys-
tem.mpx110 (admin) #> save tracesNo ASIC trace files
exist to save. Command aborted.
Admin session
set
IP Distance Gateway User Guide 109