Reboot Command; Reset Factory Command - HP StorageWorks 6100 - Enterprise Virtual Array User Manual

Authority
Syntax
Example

Reboot command

Restarts the mpx110 firmware.
Authority
Syntax
Example

Reset factory command

Restores the mpx110 factory default values. All LUN mappings are deleted, as are all persistent data
regarding targets, LUNS, and initiators. The factory default IP addresses are restored.
Authority
Syntax
Parameter
Example
108 Command-line interface
Admin session
quit
The following is an example of the quit command:
mpx110 (admin) #> quit
(none) login:
Admin session
reboot
The following is an example of the reboot command:
mpx110 (admin) #> reboot
Are you sure you want to reboot the System (y/n): y
System will now be rebooted...
Admin session
reset
factory
Restores mpx110 to factory default configuration.
The following is an example of the reset factory command:
mpx110 (admin) #> reset factory
Are you sure you want to restore to factory default
settings (y/n): y Please reboot the System for the
settings to take affect.