Figure 1-38 Installing Scsi Cable B To The Scsi Backplane - HP rp4410 Installation Manual

Installing the System
Installing Additional Components

Figure 1-38 Installing SCSI Cable B to the SCSI Backplane

Step 5. Connect the other end of the SCSI Cable B to the SCSI B channel connector on the SCSI adapter
board. (Figure 1-39)
a. Release the SCSI Cable B from its stowed position within the chassis.
b. Plug the SCSI Cable B connector into the SCSI B channel connector located at the rear of the
board.
70
Chapter 1