Housing Front Unit Removal - Epson Stylus Pro 5000 Service Manual

Stylus Pro5000

4.2.2 Housing Front Unit Removal

1. Remove "Housing Upper".(See Section4.2.1)
2. Remove "Cable, Panel" connecting to "Board Assembly, Panel" from
connector on the board.
3. Remove 2 CBS screws(3x6) securing "Grounding plate, Panel" to
"Frame, Paper Eject". (Refer to Figure4-8)
4. Release 2 hooks securing "Housing Front Unit" located front bottom side
of "Housing Lower". (Refer to Figure4-9)
5. Remove ""Housing Front Unit".
Rev.B
Chapter4 Assembly and Disassembly
2 CBS screws(3x6)
"Cable, Panel"
"Grounding Plate, Panel"
"Housing Front Unit"
Figure 4-8. Housing Front Unit Removal
Hook under "Housing
Lower"(located at both right
and left side)
Figure 4-9. Discharge Brush Removal
4-5