EPSON Stylus Pro 5000
T T
CHECK POINT
Type the following sentence on DOS screen or
on the DOS prompt for transmission.
Copy X :IPL2.HEX_LPT1
T T
During transmission, black ink LED turns on
and Cyan ink LED turns on when the
transmission is completed correctly.
Opeation2:
Check if the operation is completed correctly and wait
2 or 3 seconds. Main firmware K0xxxx.HEX is
transferred.
T T
CHECK POINT
Type the following sentence on DOS screen or
on the DOS prompt for transmission.
Copy X: K0xxxx.HEX_LPT1
T T
During transmission, Magenta ink LED turns on
and Yellow ink LED turns on when the
transmission is completed correctly.
Exit:
Exit this mode by power off.
Rev.A
Chapter1 Product Description
1-24