Upper Housing Unit Removal - Epson LX-300+II RTP Service Manual

EPSON LX-300+II/300+II RTP/1170II

4.2.2 Upper Housing Unit Removal

1. Remove the platen knob, cover assembly, printer, tractor unit and paper eject unit.
Remove the color upgrade kit if it is installed (LX-300+II only).
2. Set the release lever to the tractor feed.
3. Remove 4 screws for LX-300+II and 6 screws for LX-1170II (CBP, Tite, 3x10 F/Zn,
Torque 0.78-0.98) securing the upper housing to the lower housing.
4. .Remove the upper housing.
Upper Housing
Figure4-2. Upper Housing Removal
Disassembly and Assembly
C.B.P., Tite, 3x10 F/ZN
CPB (3x10)
Disassembly and Assembly
When installing the upper housing, be sure to insert LEDs on the
C H E C K
P O I N T panel board into the LED holes of the upper housing.
Upper Housing
Revision D
LED
Panel Board Assembly
71