Epson Stylus Pro 5000 Service Manual page 158

Stylus Pro5000
23. Insert "Axis, Curl, Transmission" to the hole of "Bush, Curl,
Transmission", and pierce "Axis, Transmission, Curl" into 5 holes on the
"Curl Unit"s. At this time, the shape of axis should be "D" shape , looking
from "A" marked side in figure 4-159. Otherwise, the axis can not go
through.
CAUTION
"Axis, Transmission, Curl" has a direction to
insert. Refer to figure 4-160 for the shape of the
axis to insert to the hole of "Bush, Curl,
Transmission" first, and the shape of axis that
comes out of "Bush, Curl, Transmission" after
inserting. Do not insert the wrong side.
Rev. B
"Bush, Curl, Transmission"
"Axis, Transmission, Curl"
Figure 4-159. Inserting "Axis, Transmission, Curl"
Shape of Axis to insert
Opposite side to
the inserted side
Figure 4-160. Checking Direction of "Axis, Transmission, Curl" to
Chapter4 Assembly and Disassembly
A
insert
4-84