Epson Stylus Pro 5000 Service Manual page 187

Stylus Pro5000
Step2. Go back to the main menu screen for adjustment, which was
used for the previous section; 5.1.1.4 "Head Angular
Adjustment Program", by pressing ESC key.
Figure 5-26. Main Menu for Adjustment
Step3. Select "Head Height Adjustment(Check pattern printing)" and
press Return key.
Step4. Following screen appears.
Figure 5-27. Screen After Selecting "Head Height Adjustment"
Rev. A
Step5. Printing is performed by pressing Return key.
Step6. Following printing pattern is printed. Since the paper is not
ejected automatically, press "Eject" button on the control
panel after the printing is over, and check the result.
Figure 5-28. Checking Pattern for Head Height Adjustment
[Explaining]
As a structure to match the #1 nozzle of left and right heads, the printer
prints printing pattern using the black nozzle in the left head and light
magenta nozzle in the right head. Adjustment is to change the right head
position front or rear slightly based on the present left head position.
If the height position is correct, all the black and light magenta lines from the
top to the bottom appear on the alignments.
Chapter5 Adjustment
5-19