Stylus Pro5000
CAUTION
If the screen shown on the previous page does not
appear, following case might be the reason.
Mode Command is not typed. (Refer to Step2)
Step5.
When PC reads the printer ID, the screen in the condition
that "Yes" is selected appears. Press Return key.
Step6.
Following screen appears.
Figure 5-2. Main Menu Screen
Step7.
Select "Maintenance" and press Return key.
Step8.
Following screen appears.
Figure 5-3. Maintenance Selection Screen
Rev. A
Step9.
Select "Ink Charge Flag Reset" and press Return key.
Step10.
Following screen appears.
Figure 5-4. Initial Charge Flag Reset Selection Screen
Step11.
Select "Yes" and press Return key.
Step12.
Following screen appears.
Figure 5-5. Caution Screen After the Initial Charge Flag Reset
Chapter5 Adjustment
5-4