Epson Stylus Pro 5000 Service Manual page 31

EPSON Stylus Pro 5000
T T
HEX dump mode (Cont2. from Maintenance mode)
Operation: After pressing Eject SW + power on, turn on the
Magenta ink LED by pressing Reset SW and
determine by Eject SW. After that, HEX dump and
ordinary mode is changed over by pressing Reset
SW.
Save setting: Press Eject SW.
Function: 1)Enter HEX dump mode
dump printing.
Exit mode by power off.
T T
Parallel I/F speed(/ACK plus width) (Cont3. from Maintenance mode)
Operation: After pressing Cleaning SW + Eject SW + Power on,
turn on the Cyan ink LED by pressing Reset SW
and determine by Eject SW. After that, High speed
and standard is changed over by pressing Reset SW.
Save setting: Press Eject SW.
Setting item and LED indicator:
/ACK with short(0.5us) Black ink LED is on.
/ACK with standard(2us) Cyan ink LED is on.
Function: 1)Select "Cyan" in maintenance mode to enter this
mode. 2)Power LED and Cassette 1 blink.
Cassette2 LED turns on.
current setting.
5)Short or Standard is changed over everytime Reset
SW is pressed.
[In case of turning power off]
1)Save setting(Data registration) 2)Exit this mode 3)Power off
[In case of pressing Eject SW]
1)Save setting 2)Exit this mode 3)Ordinary printing mode(idle state)
Rev.A
2)Hex dump idle 3)HEX
4) Ink LED indicates
T T
PC437-PC850 Code Page select(Cont4.from Maintenance mode)
Operation: After pressing Cleaning SW +Eject SW +Power on,
turn on the Yellow ink LED by pressing Reset SW
and determine by Eject SW. After that, PC-437 and
PC-850 is changed over by pressing Reset SW.
Save setting: Power off or Eject SW
Setting item and LED indicator:
PC437 Black ink LED is on.
PC850 Cyan ink LED is on.
Function: 1)Select maintenance mode "Yellow" to enter this
mode. 2)Power LED and cassette 2 LED blink.
3)Ink LED indicates current setting.
PC850 is changed over every time Eject SW is
pressed.
[In case of turning power off]
1)Save setting(Data registration) 2)Exit this mode 3)Power off
[In case of pressing Eject SW]
1)Save setting 2)Exit this mode 3)Ordinary printing mode(idle state)
Chapter1 Product Description
4)PC437 and
1-21