Epson Stylus Pro 5000 Service Manual page 164

Stylus Pro5000
39. Insert "Gear,10" to "Axis, Transmission, Curl", and fix it with "E" shaped
ring(2.3,F/Uc). (See figure4-171)
40. Pierce a needle(diameter 2.0mm) into the "Curl Unit", which is the
nearest to "Lever, Roller, Paper Feed, Left" side. (See figure4-172)
CHECK POINT
The reason to perform procedure 40 is to make the
axis shape of "Gear,10" perfect reversed "D"
shape, as it is shown in figure4-171, and prepare
to adjust alignment of the whole "ASF Unit."
Rev. B
Chapter4 Assembly and Disassembly
"Gear,10"
"E" shaped ring
(2.3F,Uc)
Figure 4-171. Installing "Gear,11"
"Curl Unit"
Pierce a needle.
Figure 4-172. Inserting A Needle for Adjusting Alignment
"Lever, Roller, Paper
Feed, Left"
4-90