Epson Stylus Pro 5000 Service Manual page 115

Stylus Pro5000
6. Remove "Tension Spring,0.588", which is giving tension to "Lever,
Hopper", and remove "Tension Spring,0.588". (Refer to Figure4-77)
7. Remove "Torsion Spring 25.5", which is giving tension to "Lever, Hopper,
Lock".(Refer to Figure4-77)
8. In the condition that "Hopper, Release, Lever" is manually slid to the right
side, remove "Lever, Hopper, Lock". (Pressing toward yellow arrow
direction in Figure4-77 makes "Lever, Hopper, Lock" up at the left side,
and "Lever, Hopper, Lock" can be removed easily.) (Refer to Figure4-77)
9. Remove 2 CBS screws(3x6) securing "ASF Gear Train Cover Assembly",
and remove "ASF Gear Train Cover Assembly". (Refer to Figure4-77)
Rev.B
"Torsion Spring,25.5"
CBS(3x6)
"ASF Gear Train
Cover Assembly"
Push manually.
Figure 4-77. Hopper Control Parts Removal
Chapter4 Assembly and Disassembly
"Lever, Hopper, Lock"
"Tension Spring,0.588"
"Lever, Hopper"
"ASF Gear Train
Cover Assembly"
"Hopper, Release, Lever"
4-41