Epson Stylus Pro 5000 Service Manual page 167

Stylus Pro5000
47. Rotate "Combination Gear,24,24" one round to left direction, and check
the operation of "ASF Unit". Make sure that all "Lever Assembly, Curl"s
located inside of "Curl Unit" return to the waiting position simultaneously
by spring force, as soon as "Roller, Paper Feed" return to the sand-by
position.
WARNING
Do not rotate "Combination Gear,24,24" to right
direction. "Combination Gear, 24,24" rotates only
to left direction. If you rotate this to right direction
by force, the alignment(gear arrangement)
adjusted in the "ASF Unit" go wrong. As a result,
it may damage parts.
CAUTION
Of course the shape of axis with "Gear,10" is not
reversed "D" shape any more, once you rotate
"Combination Gear,24,24" to left direction.
However, since the alignment in the "ASF Unit" is
already adjusted, it is all right to install "ASF Unit"
to the printer body without worrying about the
shape of axis.
Rev. B
Rotate to left direction(only one
round) and check the gear operation.
Do Not rotate to right
Figure 4-177. Checking Operation After Assembling "ASF Unit"
Chapter4 Assembly and Disassembly
4-93