Epson Stylus Pro 5000 Service Manual page 206

Stylus Pro5000
AC Adapter
LED for upper sur-
face sensor signal
Relay Board
Paper Load Roller
Upper surface
sensor
Fixing screw for upper
surface sensor
ASF Unit
Figure 5-58. Connection between ASF Unit and Adjust Tool
Rev. A
Paper Pick Up Detector
(upper surface sensor)
Adjust Tool (body)
Power LED
Power SW
Signal Cable
Step4. Attach the paper tray to the printer body.
Step5. Tighten the fixing screw until the LED of the adjust
tool(LED which detect the upper surface sensor signal)
turns on.
Step6. Tighten the screw slowly until LED turns off.
Step7. When the LED goes off, apply the Neji Lock (screw lock) on
the position that LED is turned on by pressing ASF unit lightly
and LED goes off by leaving hand off ASF unit.
Chapter5 Adjustment
5-38