Pool Routing - AT&T MERLIN LEGEND Release 2.0 Programming Summary Manual

Automatic Route Selection

Pool Routing

Use this procedure to identify the trunk pools on which to route calls to area
codes and/or exchanges included in ARS tables.
A maximum of 6 routes (numbered 1 through 6) can be specified for each
subpattern. Pool routing is programmed for Tables 1 through 16. Table 17 is
the Default Toll table and Table 18 is the Default Local table.
Summary: Pool Routing
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
15-6
Pool Routing
System manager
Hybrid/PBX
Not required
Form 9b, Automatic Route Selection Tables
Form 9c, Automatic Route Selection Default and
Special Numbers Tables
Not applicable
Not applicable
No
No
Tables ARS
Dial table no. and pool route
dial-out code
Enter
[F8] [F6] [F3] / [F10]
pool route no. [F10]
[F10] [F5] [F5]
Sub A Pools/Sub B Pool
Enter
Exit Exit
Type table no. and
Type pool dial-out code
Dial pool