Other Digits - AT&T MERLIN LEGEND Release 2.0 Programming Summary Manual

Automatic Route Selection

Other Digits

Use this procedure to specify extra digits that must be added by the system
to the beginning of the number dialed by the caller when calls are placed on
an identified route.
NOTE:
Pool routes must be programmed before you assign other digits.
A maximum of 20 digits can be added, in any combination of the digits
0 through 9.
Special characters such as switchhook flash, stop, and # cannot be included
as extra digits. Pause is allowed, except in the first position.
Other digits are assigned to Tables 1 through 18.
Summary: Other Digits
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
System manager
Hybrid/PBX
Not required
Form 9b, Automatic Route Selection Tables
0
20 digits (0 - 9)
No
No
Tables ARS
Dial table no. and pool route no.
Digit
Drop Dial digits to be added
Exit
[F8] [F6] [F7] / [PgUp] and [F3]
table no. and pool route no.
Type digits to be added
Sub A Digit/ More
Enter
[F10]
[F10]
Other Digits
Sub B
Enter
Exit
Type
[Alt] + [P]
[F5] [F5]
15-9