Remote Access Without Barrier Codes - AT&T MERLIN LEGEND Release 2.0 Programming Summary Manual

System Features

Remote Access without Barrier Codes

Use this procedure to change the class of restriction for one of the following:
all non-tie lines/trunks
all tie trunks and DID trunks with Remote Access
the DID remote access code
NOTE:
If barrier code requirements have been established for Remote Access
users, do not use this procedure; use "Remote Access with Barrier
Codes."
The class of restriction assigned is one of the following:
Restriction – determines whether Remote Access users can make local
and/or toll calls; the following settings are included:
—
—
—
ARS Facility Restriction Level (Hybrid/PBX only) – allows or disallows
use of outgoing trunks by assigning a facility restriction level from 0
through 6. (The value assigned is the opposite from the FRL assigned
to the ARS route, where a value of 0 is the most, and a value of 6 is the
least restrictive.)
Allowed List Assignment – assigns Allowed Lists and is used when
Remote Access users are restricted from making local or toll calls.
Disallowed List Assignment – assigns Disallowed Lists and is used
when Remote Access users are not restricted from making local or toll
calls.
A maximum of eight Allowed or Disallowed Lists can be assigned to trunks.
unrestricted
toll restricted
outward restricted
Remote Access without Barrier Codes 14-31