Automatic Route Selection
ARS Tables
Use this procedure for the following tasks:
to specify type of table (6-digit, area code, exchange, or 1 + 7)
to add or change area codes to be included in each table
to add or change exchanges to be included in each table
A maximum of 16 tables can be established, numbered 1 through 16. Each
table can have a maximum of 100 entries, numbered 1 through 100. Tables
17 and 18, the Default Toll and Default Local tables respectively, cannot be
changed.
The first entry in a 6-digit table must be the area code. Subsequent entries
consist of exchanges within that area code.
Area code tables can contain only area codes.
Exchange and 1 + 7 tables can contain only exchanges.
The wildcard character (pause) cannot be used to enter area codes or
exchanges in ARS tables.
15-3
ARS Tables