AT&T MERLIN LEGEND Release 2.0 Programming Summary Manual page 162

Telephones
Valid Entries
Inspect
Copy Option
Console Procedure
9-10
Assign Intercom or System Access Buttons
Hybrid/PBX Mode: System Access Ring, System
Access Voice, and System Access Originate Only
(Ring) buttons are assigned to all analog multiline and
MLX telephones, excluding operator positions. Two
System Access Ring buttons and a System Access
Originate Only button are assigned to tip/ring
equipment (for example, single-line telephones or fax
machines connected to an 012 module). No Personal
line or Pool buttons are assigned.
All modes: System Access Ring (Hybrid/PBX mode)
or Intercom Ring (Key and Behind Switch modes),
System Access Voice (Hybrid/PBX mode) or Intercom
Voice (Key and Behind Switch modes), and the first
18 through 29 lines connected to the control unit are
assigned to all DLC operator positions. The number
of lines assigned depends on the type of telephone
used as a DLC operator position. Refer to the
appropriate telephone planning form for details.
Not applicable
Yes: specific button options
Yes (You can copy additional SA buttons to another
station, but you cannot overwrite SA buttons that are
already assigned.)
To Program Extension:
More
Cntr–prg
no.
Enter Start
Enter Exit
To Copy Extension Programming:
More
Cntr-Prg
ext. no.
Enter
Exit Exit
program Ext.
Program extension
Exit
Copy ext.
Dial copy to ext. no.
Dial ext.
Dial copy from
Enter