Qcc Queue Priority Level - AT&T MERLIN LEGEND Release 2.0 Programming Summary Manual

Lines and Trunks

QCC Queue Priority Level

Use this procedure to assign QCC queue priority level values (1-7) to each
loop-start, ground-start, and automatic-in tie trunk in your system. The value
assigned determines the order in which calls are sent to the QCC operator
positions. Call priority 1 is the highest priority, 7 is the lowest priority.
NOTE:
This procedure applies only in Hybrid/PBX mode in a system that includes
QCC operator positions.
4-14
QCC Queue Priority Level