Digit Absorption - AT&T MERLIN LEGEND Release 2.0 Programming Summary Manual

Automatic Route Selection

Digit Absorption

Use this procedure to specify how many of the digits dialed (0 through 11) by
the caller should be absorbed by the system (not sent to the telephone
company's central office) when a call is made on an identified route.
NOTE:
Pool routes must be programmed before you assign digit absorption.
Values 1 through 11 indicate that the system should not send a certain
number of digits, starting with the first digit dialed by the user (after the dial-
out code).
Digit absorption is assigned to Tables 1 through 18.
Summary: Digit Absorption
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
15-8 Digit Absorption
System manager
Hybrid/PBX
Not required
Form 9b, Automatic Route Selection Tables
0
0 - 11
No
No
Tables ARS
Dial table no. and pool route no.
Absorb
Drop Dial no. of digits to absorb
Exit Exit
[F8] [F6] [F6] / [PgUp] and [F2]
table no. and pool route no.
Type no. of digits to absorb
[F5]
SubA Absorb / More and SubB
[F10]
[F10]
Enter
Enter
Type
[Alt] + [P]
[F5]