Host System Dial Codes For Behind Switch Mode - AT&T MERLIN LEGEND Release 2.0 Programming Summary Manual

System Features
Host System Dial Codes for Behind
Switch Mode
Use this procedure to assign the host system dial codes for Transfer,
Conference, and Drop.
NOTE:
This procedure applies in Behind Switch mode only.
When multiline telephone users press the Transfer, Conference, and Drop
buttons, a signal is sent to the host system. Assigning the host dial codes
ensures that users can take advantage of these features through the host
system.
Summary: Host System Dial Codes for Behind
Switch Mode
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
System manager
Behind Switch
Not required
Form 1, System Planning
No host dial codes are assigned
Not applicable
No
No
More
Options
Drop Dial host system dial code
Exit Exit
[F7] [PgUp]
[P] Type host system dial code
[F5]

Host System Dial Codes for Behind Switch Mode

BehndSwitch
[F2] Select feature
Select feature
Enter
[Alt] +
[F10] [F5]
14-21